Quicklinks









Products

The SoSafe Graffiti Remover range consists of a series of three key graffiti removers, each specifically formulated to suit a range of substrate and removal conditions. See the SoSafe Product Selector to choose the correct product for the substrate being treated.  All SoSafe Graffiti Removal products now powered by Surface Active Technology (S.A.T.), a new and exclusive technology SoSafe has developed to remove deep stains from most substrates which may have been previously unmovable. S.A.T. is not available anywhere else in the world and has now been incorporated into our entire range of graffiti removers.

 

*** NEW PRODUCT RELEASE ***

Graffiti EnviroSafe in partnership with SoSafe is proud to annouce the release of Vanilla Fresh and External Surface Revival!

 

So Safe Vanilla Fresh - The latest in bio-technology -  odor neutralizing product to safely remove all  nasty odors such as cigerette, urine, garbage smells!

 

So Safe External Surface Revival (ESR) - A revolutionary mould and fungi killer and retardant. External Surface Revival provides up to 12 months protection, eliminating the need to use expensive, enviromentally dangerous copper sulphate based products and ineffective bleach / chlorine  products.
 

For more information scroll to the bottom of the page.

Yellow Graffiti Remover for Painted Surfaces


Yellow graffiti remover for painted surfaces is the gentlest graffiti remover in the SoSafe range, Yellow label has been specifically designed to work slower than SoSafe Blue. Yellow will allow the removal of graffiti from sensitive surfaces layer by layer, without damaging the surface at hand.

 

When applying to the graffiti contact time on the surface is critical, as the longer it is left on the surface the deeper the product will penetrate. Ink / Marker graffiti is generally easier to remove with a simple wipe on wipe off approach. Spray paints will require longer contact time.

 

 Product Data Sheet - SoSafe Yellow Graffiti Remover

 

Graffiti Type: Marker pen, paint, oil, grease, poster glue and crayon.
Water deactivated: Yes
Form: Liquid
Quantities: 12 x 1 Quart Case, 52 Case pallet

Blue Graffiti Remover for Concrete Surfaces

 

Blue graffiti remover for concrete surfaces is the most popular graffiti remover in the SoSafe range. SoSafe Blue label can be used on most varieties of porous surfaces and other difficult surfaces. Blue will continue to attack the surface as long as it has contact time, for this reason Blue is also available in sprayable gel.

 

Sprayable gel when applied to a vertical wall, will hold in position until the user rinses the wall, reducing the quantity of product required to remove graffiti as well as preventing the graffiti dye running down the walls. SoSafe Blue is suitable for use on concrete, marble, blocks, stucco, stone and other porous surfaces. Will remove paint, oil, grease, poster glue and crayon.

 

SoSafe Blue Liquid is popular with contractors as it is used in conjunction with Shadow Chaser to eliminate all traces of graffiti, see the Shadow Chaser instructions for further information.


Product Data Sheet - SoSafe Blue Graffiti Remover (Sprayable Gel / Liquid)

 

Graffiti Type: Marker pen, paint, oil, grease, poster glue and crayon.
Water deactivated: Yes
Form: Sprayable Gel
Quantities: 12 x 1 Quart Case, 52 Case pallet

Red Professional Graffiti Remover

 

SoSafe Red Professional (Red Label) is the latest edition to the SoSafe range of graffiti removers. Professional edition has been specifically formulated for use by professionals and contractors with pressure cleaning equipment. Unlike Blue and Yellow graffiti remover, Professional graffiti remover is not deactivated by water. The advantage of this is that it can be used immediately after pressure cleaning to give a deeper clean.

 

For difficult graffiti stains (i.e. shadows), Professional should be used in conjunction with SoSafe Shadow Chaser (see application section). This will eliminate all stains, graffiti, shadows and/or discolouration. It should be noted that the SoSafe Professional will leave the surfaces with a ‘wet’ appearance for up to a couple of days after treatment; this illustrates how deep the chemical is penetrating the substrate and is not permanent.

 

NOTE: Some contractors prefer to leave Professional on light shadows overnight to fade out shadows when not used in conjunction with SoSafe Shadow Chaser. SoSafe Graffiti Remover Professional is suitable for use on concrete, blocks,stucco, stone and other porous surfaces.


Product Data Sheet - SoSafe Professional Graffiti Remover


Graffiti Type: Marker pen, paint, oil, grease, poster glue and crayon.
Water deactivated: No
Form: Liquid
Quantities: 12 x 1 Quart Case, 52 Case pallet

SoSafe Safety Shield

 

SoSafe Safety Shield is a semi sacrificial surface graffiti protection, making it easy to remove graffiti and suitable for all surface types (excluding glass). Safety Shield protects a surface against graffiti, mould and is reduces environmental effects on the substrate.

Furthermore, Safety Shield is UV resistant i.e. it will not breakdown from exposure to the sun and requires no mixing. SoSafe Safety Shield will not leave a glossy finish and allows the surface to breathe. SoSafe Safety Shield can be painted over with no detrimental effects (i.e. the paint will not peel).

How it works

Safety Shield works by blocking the pores of the surface, the pores of a graffiti surface is what causes the ‘shadow’ effect. This protection allows the graffiti to be removed with no harm to the protected substrate below.  The vast majority of porous substrates should be treated with two coats of Safety Shield, some substrates may absorb more product and therefore require a third coat such as sand stone.  Safety Shield can be applied by brush or sprayer.

 

Product Data Sheet - SoSafe Safety Shield (Anti Graffiti Coating)

 

Protection Level: Semi-Sacrificial (protects surface against graffiti remover for several attacks).
Coverage:8 - 10 Metres per litre (2 coats)*
Life Span: 5 Years +
Form: Liquid
Quantities: 12 x 1 Quart Case, 52 Case pallet

Shadow Chaser

 

Shadow Chaser is only available for use by professionals. Shadow Chaser is a corrosive formulation designed to work in conjunction with So Safe Professional Edition (Red Label).

How it works
Apply SoSafe Professional (Red Label) to the surface to attack the graffiti, wait 60 seconds then apply Shadow Chaser with a brush or roller (do not splash it around) over the top of the graffiti. The surface will have a small amount of white suds appear as the Shadow Chaser and Professional penetrate the surface; the shadow will disappear in front of your eyes.

Shadow Chaser has been specially formulated for stubborn graffiti stains that cannot be removed by conventional means and requires a strong arm approach.

 

Product Data Sheet - Shadow Chaser (Graffiti Ghost Remover)

 

NOTES:

1. Please pay attention to all safety precautions on the packaging and MSDS.

2. All safety equipment is mandatory.

3. Shadow Chaser must not be sprayed / atomized.

4. People without safety equipment must not come in contact with product.

5. Aluminium is affected by Shadow Chaser do not allow contact, if contact occurs wash thoroughly with water.

 

Graffiti Type: Shadows, used in conjunction with SoSafe Professional (Red Label).
Water deactivated: No
Deactivation: Water dilution / CO2 Absorption
Form:  Liquid
Quantities: 12 x 1 Quart Case, 52 Case pallet
                     3 x 1.32 US Gallon, 72 Case pallet

SoSafe External Surface Revival

 

SoSafe External Surface Revival cleans external surfaces affected by weather deterioration, such as water, mould, fungus, moss and discolouration, returning the surface to its’ original condition. SoSafe External Surface Revival has a residual effect and will continue to protect the surface for up to 12 months after one application. This product will kill (not just bleach) mould spores, preventing fungus from returning.

SoSafe External Surface Revival is chlorine free, two part chemical hospital grade disinfecting qualities. This product can be used on any surface and is made from environmentally friendly, biodegradable with naturally occurring ingredients. Ideal for public toilet areas, showers, outside dining areas, around pools and on public pathways.

 

Product Data Sheet - SoSafe External Surface Revival- Mould Remover & Inhibitor

Protection Level:Up to 12 months from mould
Biodegradable: Yes
Form: Liquid
Quantities: 2 x 1.32 US Gallon (5Lt)

moss and mould removal.

Vanilla Fresh - Odor Neutralizer

Vanilla Fresh - odor neutralizerVanilla Fresh is a scientifically prooven odor neutralizer and surface sanitizer,  originally developed to neutralize smoke, vomit / urine smells and to interrupt the breeding cycle of flies. SoSafe Vanilla Fresh has proven useful to a much more broad scope of customers in areas where traditional deodorizers do not work!

How Vanilla Fresh works?
Vanilla Fresh leaves a light vanilla scent that temporarily masks the smell while the Surface Active Technology goes to work, killing smell producing bacteria. Once the vanilla scent dissipates the area has been odor neutralized of all nasty smells. Bracton Vanilla Fresh has been scientifically proven to remove bacteria at the source, Vanilla Fresh will also prevent new bacteria growth, resulting in odor and bacteria free surfaces for longer!

 

Ideal for:

*Nursing Homes    * Hire Car & Mass Transport Systems

* Councils               * Restaurants (including fridges)

* Home                   * Hotels

* Clubs                    * Where ever there is an odour problem

SoSafe Vanilla Fresh is the most effective odour remover from indoor areas such as toilet areas to remover urine smells, garbage areas carpets, tiles, rubber mats, fridge, cars and many more.

 

Product Data Sheet - Vanilla Fresh - Odor Neutralizer

 

Protection Level: Up to 2 weeks protection depending on traffic
Biodegradable: Yes
Form: Sprayable Liquid
Quantities: 1 x 6Lt Carton.


    2008 Graffiti EnviroSafe LLC. 919 S. Moccasin Place Sapulpa, Oklahoma 74066 Phone: +1 (918) 284 8607 Fax: +1 (918) 224 6171